MP30-AR0

Discontinued

Rev. 1.1

AppliedMicro^® X-Gene1 SoC ( uBoot Mode)

AppliedMicro^® X-Gene1^® processor
8 x ECC UDIMM DDR3 DIMM slots
2 x 10GbE SFP+ LAN ports
2 x GbE LAN ports (Marvell^® 88E1512)
4 x SATA III 6Gb/s
1 x USB 2.0 header
Aspeed^® AST2400 remote management controller

* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

SPECIFICATIONS

Form Factor

microATX
244W x 244D (mm)

CPU

AppliedMicro^® X-Gene 1 processor
ARMv8 architecture
8 cores
2.4 GHz
45W max. TDP

Socket

Chipset

Memory

8 x DIMM slots
Quad channel memory architecture
RDIMM/ECC UDIMM modules supported
Single, dual rank UDIMM modules up to 8GB supported
Supported speeds:
- 1 DIMM per channel: up to 1600 MHz
- 2 DIMM per channel: up to 1333 MHz

LAN

2 x 10GbE SFP+ LAN ports (integrated)
2 x GbE LAN ports (Marvell^® 88E1512)
1 x 10/100/1000 management LAN

Video

Integrated in Aspeed^® AST2400
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp

Audio

SAS

SATA

4 x SATA III 6Gb/s ports

RAID

Expansion Slots

2 x PCIe x16 (Gen3 x8 bus) slots

Internal I/O

1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
4 x SATA III 6Gb/s ports
1 x CPU fan header
4 x System fan headers
1 x SD card slot
1 x USB 2.0 header
2 x Front panel headers
1 x APM strap header
1 x HDD back plane board header
1 x PMBUS header
1 x BMC JTAG header
1 x JTAG PLD header
1 x BIOS_H header
1 x Chassis intrusion header
1 x SATA DOM jumper
1 x BIOS recovery jumper
1 x ACK selection jumper
1 x IPMB connector

Rear I/O

2 x USB 2.0
1 x VGA
1 x Serial
2 x SFP+
3 x RJ45
1 x ID button with LED
1 x Power button with LED
1 x Status LED

TPM

OS Compatibility

Open Linux (included)

Board Management

Aspeed^® AST2400 management controller
Avocent^® MergePoint IPMI 2.0 web interface:

Network settings
Network security settings
Users control
Services settings
IPMI settings
Sessions control
LDAP settings
Power control
Voltages, fans and temperatures monitoring
System event log
Events management (platform events, trap settings, email settings)
Serial Over LAN
vKVM & vMedia (launch, configuration)

PSU Connectors

1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector

Operating Properties

Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Retail Packaging Content

1 x MP30-AR0
1 x I/O shield
4 x SATA III 6Gb/s cables
Box dimensions: 321 x 308.5 x 78.5 mm

Bulk Packaging Content

10 x MP30-AR0
10 x I/O shields
Box dimensions : 600 x 386 x 368 mm

Reference Numbers

Retail: 9MP30AR0MR-00
Bulk: 9MP30AR0NR-00

SUPPORT

Downloads

BIOS
Utility
Firmware

Manual
Support List

Online Support

BIOS

Utility

Firmware

QVL

BIOS

Description

Version

Size

Date

BIOS for MP30-AR0
For board PCB version 1.1 only

Version : F6b

89.01 MB

Nov 18, 2015

Download

Warning:
Because BIOS flashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction.

What is a BETA?
BETA describes a new version that is reliable yet may not include all the features of the final product. During this phase we are previewing new features and gathering customer input to insure our product provides the best experience possible.